MAXFLEX®

MAXFLEX® HT

MAXFLEX® HF

MAXFLEX® IsolOne

Download MAXFLEX® Calculator

• MAXFLEX® Specification

PHYSICAL  PROPERTIES*		MAXFLEX				TEST  METHOD*
Cell Structure		Closed Cell				-
Density lbs/ft3 (g/cm3)		3-6 (0.048-0.096)**				ASTM D 1667
Thermal Conductivity       BTU. in/ft 2 hr.°F (W/mK)	Mean Temp.	- 4° F ( -20°C)	32° F ( 0°C)	75° F ( 24°C)	90° F ( 32°C)	104° F (40°C)	ASTM C177 JIS A1412 DIN 52613
	K-Value	0.22 0.032	0.23 0.034	0.25 0.037	0.026 0.038	0.27 0.039
Service Temperature***		- 70°F  to  257°F  - 57°C  to 125°C				MAXFLAX  becomes hard at -57°C but can be used even at -200°C
Water Vapor Permeability (kg/Pa.s.m)		0.10 perm-in (0.15 x 10-12)				ASTM C 355 ASTM E96 ****
Moisture Resistance ( µ Value)		µ   not less than 5000				DIN 52615
Water Absorption (weight %)		not more than 3%				ASTM D 1056
Ozone Resistance		No crack				ASTM D 1171
Heat Stability (% shrinkage)  at 200°F and 220°F for 7 days		4.5 and 5.5 respectively				ASTM C 534
Flammability & Smoke Density		Class VO Self-extinguishing Class 1 Class 0 Smoke density 80				UL - 94 ASTM D 635 BS476 Part 7 1987 BS476 Part 6 1987 ASTM-E84 (15mm thick)
U.V.  Weather Resistance		Excellent				-
Nitrosamine Contents		Not detected				U.S. FDA
Flexibility		Excellent				-

Note : * Figure show average values obtained by the world well-knowm testing institues. ** Average density of insulation thickness over 20 mm. *** At temp . under -57 °C MAXFLEX® HF becomes hard, but it doesn't attect themal conductivity nor water vapor permeability. **** Water vapor permeability test was done under test method ASTM E96 dehydrate test method at 37.8 °C

• MAXFLEX® HT Specification

PROPRIETA' FISICHE*	MAXFLEX-HT					METODO DI PROVA	ENTE CERTIFICANTE
MATERIALE	EPDM GOMMA SINTETICA A BASE DI ETILENE, PROPILENE,DIENE MESCOLATI CON ADDITIVI
STRUTTURA	CELLE COMPLETAMENTE CHIUSE
DENSITA' (g/cm3)	0.048 0.080**					ASTM D 1667	PSB SINGAPORE
CONDUCIBILITA' TERMICA, (W/m.K)	-20 'c	0 'c	24 'c	32 'c	4 0 'c	ASTM C177 JIS A 1412 DIN 52613	IBP GERMANA
	0.031	0.033	0.036	0.037	0.038
TEMPERATURA DI ESERCIZIO	FINO A 150 'C SERVIZIO CONTINUO
	FINO A 180 'C SERVIZIO INTERMITTENTE
PERMEABILITA AL VAPOR D'ACQUA (kg/Pa.s.m)	0.10 perm-in (0.15x10 -12)					ASTM C 355 ASTM E96	PSB SINGAPORE
RESISTENZA  ALLA UMIDITA	µ NON  INFERIORE A 10,000					DIN 52615	PSB SINGAPORE
ASSORBIMENTO D'ACQUA (% IN PESO)	NON SUPERIORE AL 1.5%					ASTM D 1056	PSB SINGAPORE
RESISTENZA  ALL' OZONO	NON PRESENTA FESSURAZION					ASTM D 1171	PSB SINGAPORE
RESISTENZA  ALL' INVECCHIAMENTO  A 160'C	NON PRESENTA FESSURAZION					ASTM C 534	PSB SINGAPORE
RESISTENZA  AI RAGGI  UV	NON PRESENTA FESSURAZION					ISO 4892-2	PSB SINGAPORE
STABILITA' AL CALORE (% RITIRO IN PESO) A 95'C & 105'C PER 7 GIORNI	3.5 & 4.5					ASTM  C  534	PSB SINGAPORE
INFIAMMABILITA'  & DENSITA' FUMI	CLASSE VO					UL-94	PSB SINGAPORE
	AUTOESTINGUENTE					ASTM D635	PSB SINGAPORE
	CLASSE 1					BS 476 Part 7-1987	PSB SINGAPORE
	CLASSE 0					BS 476 Part 6-1987	PSB SINGAPORE
	CLASSE M1					AFNOR NF P92 501	CREPIMFRANCIA
CONTENUTO DI NITROSAMMINA	NO					BS EN 12868	PSB  SINGAPORE
RESISTENZA  A FUNGHI,MUFFE	PASSA					ASTM  G21	PSB  SINGAPORE
RIDUZIONE DEL RUMORE	36.3 db					DIN  52219	IBP
FLESSIBILITA'	ECCELLENTE

Note : * VALORI MEDIATIOTTENUTI DA ENTI INTERNAZIONALI ** DENSITA & MEDIA PER SPESSORI SOPRA 20 mm.

• MAXFLEX® HF Specification

PHYSICAL PROPERTIES*	MAXFLEX® HF					TEST METHOD*	INSTITUTE
MATERIAL OF INSULATION	SYNTHETIC ELASTERMERIC WITHOUT CHLORIDE AND BROMIDE IONS
CELL STRUCTURE	COMPLETE CLOSED CELL					-	-
DENSITY lbs/ft3 (g/cm3)	3 ~ 5 ( 0.048 ~ 0.080 )					ASTM D 1667	PSB Corp., SINGAPORE
THERMAL CONDUCTIVITY BTU.in/ft2 hr. °F (W/m.K)	-4 °F -20 °C	32 °F 0 °C	75 °F 24 °C	90 °F 32 °C	104 °F 40 °C	ASTM C177 JIS A 1412 DIN 52613	FIW MUNCHEN, GERMANY
	0.22 0.031	0.23 0.033	0.25 0.036	0.26 0.037	0.27 0.038
SERVICE TEMPERATURE **	-57 °C to 150 °C					MAXFLEX® HF becomes hard at -57 °C but can be used even at -200 °C **
WATER VAPOR PERMEABILITY (kg/Pa.s.m)	0.10 perm-in (0.15 x 10-12)					ASTM C 355 ASTM E96 ***	PSB Corp., SINGAPORE
MOISTURE RESISTANCE (µ Value)	µ not less than10,000					DIN 52615	PSB Corp., SINGAPORE
WATER ABSORPTION (weight %)	Not More Than 1.5%					ASTM D 1056	PSB Corp., SINGAPORE
OZONE RESISTANCE	Non crack					ASTM D 1171	PSB Corp., SINGAPORE
HEAT STABILITY (% Shrinkage) at 200 °F and 220 °F for 7 days	3.5 and 4.5 respectively					ASTM C 534	PSB Corp., SINGAPORE
ULTRA - VIOLET RESISTANCE	Non Crack					ISO 4892-2	PSB Corp., SINGAPORE
FIRE PERFORMANCE	Class VO					UL - 94	PSB Corp., SINGAPORE
	Self-extinguishing					ASTM D635	PSB Corp., SINGAPORE
	B2					DIN 4102	BODYCOTE, GERMANY
BEHAVIOR IN FIRE	Self-extinguting, does not spread flame, does not drip					-	-
NITROSAMINE CONTENTS	No Detect					BS EN 12868	PSB Corp., SINGAPORE
FUNGUS RESISTANCE	Passed					ASTM G21	PSB Corp., SINGAPORE
RIDUZIONE DEL RUMORE	36.3 db					DIN 52219	IBP, GERMANY
FLEXIBILITY	Excellent					-	-
STAINLESS STEEL AND COPPER CORROSION	Negligible					-	-

Note : * Figure show average values obtained by the world well-knowm testing institues. ** At temp . under -57 °C MAXFLEX® HF becomes hard, but it doesn't attect themal conductivity nor water vapor permeability. *** Water vapor permeability test was done under test method ASTM E96 dehydrate test method at 37.8 °C

• MAXFLEX® IsolOne Specification

PHYSICAL PROPERTIES*	MAXFLEX® IsolOne					TEST METHOD*	INSTITUTE
MATERIAL OF INSULATION	EDPM BLEND WITH ADDITIVE
CELL STRUCTURE	COMPLETE CLOSED CELL					-
DENSITY lbs/ft3 (g/cm3)	3 ~ 5 ( 0.048 ~ 0.080 )					ASTM D 1667	PSB Corp., SINGAPORE
THERMAL CONDUCTIVITY BTU.in/ft2 hr. °F (W/m.K)	-4 °F -20 °C	32 °F 0 °C	75 °F 24 °C	90 °F 32 °C	104 °F 40 °C	ASTM C177 JIS A 1412 DIN 52613	FIW MUNCHEN, GERMANY
	0.22 0.031	0.23 0.033	0.25 0.036	0.26 0.037	0.27 0.038
SERVICE TEMPERATURE **	up to 150 °C operating continuous up to 180 °C operating intermitant					MAXFLEX® HF becomes hard at -57 °C but can be used even at -200 °C **
WATER VAPOR PERMEABILITY (kg/Pa.s.m)	0.10 perm-in (0.15 x 10-12)					ASTM C 355 ASTM E96 ***	PSB Corp., SINGAPORE
MOISTURE RESISTANCE (µ Value)	µ not less than 10,000					DIN 52615	PSB Corp., SINGAPORE
WATER ABSORPTION (weight %)	Not More Than 1.5%					ASTM D 1056	PSB Corp., SINGAPORE
OZONE RESISTANCE	Non crack					ASTM D 1171	PSB Corp., SINGAPORE
AGING RESISTANCE AT 160 C. 150 hrs.	Non crack					ASTM 537	CERISIE, ITALY
ULTRA - VIOLET RESISTANCE	Non Crack					ISO 4892-2	CERISIE, ITALY
HEAT STABILITY (% Shrinkage) at 200 °F and 220 °F for 7 days	3.5 and 4.5 respectively					ASTM C 534	PSB Corp., SINGAPORE
FLAMMABILITY AND SMOKE DENSITY	Class VO					UL - 94	PSB Corp., SINGAPORE
	Self-extinguishing					ASTM D635	PSB Corp., SINGAPORE
	Class 1					BS 476 Part 7 1987	PSB Corp., SINGAPORE
	Class 0					BS 476 Part 7 1987	PSB Corp., SINGAPORE
	Class M1					FRANCE AFNOR NF P92 501	CREPIM, FRANCE
NITROSAMINE CONTENTS	No Detect					BS EN 12868	PSB Corp., SINGAPORE
FUNGUS RESISTANCE	Passed					ASTM G21	PSB Corp., SINGAPORE
NOISE REDUCTION	36.3 db					DIN 52219	IBP, GERMANY
FLEXIBILITY	Excellent					-	-

Note : * Figure show average values obtained by the world well-knowm testing institues. ** At temp . under -57 °C MAXFLEX® HF becomes hard, but it doesn't attect themal conductivity nor water vapor permeability. *** Water vapor permeability test was done under test method ASTM E96 dehydrate test method at 37.8 °C